The top structural, mechanical, electrical and civil engineering related companiesin Texas.
Short answer: Exchange lists 11 engineering firms in Texas: four in Houston, three in Dallas and one each in Fort Worth, Irving, Plano and Richardson. Texas regulates the firm as well as the engineer. Under the Texas Engineering Practice Act (Occupations Code ch. 1001), only a licensed professional engineer may practice engineering, and a business entity may not offer or perform engineering, or use “engineering” in its name, until it is registered with the Texas Board of Professional Engineers and Land Surveyors and the work is done or directly supervised by a full-time licensed engineer.
Licensing board
Texas Board of Professional Engineers and Land Surveyors (TBPELS), Austin.
Governing law
Texas Engineering Practice Act, Occupations Code ch. 1001; board rules in 22 Texas Administrative Code chs. 131–139, with licensee and seal rules in ch. 137.
Firm registration
Required before a business entity offers engineering in Texas (§1001.405); now renewed every two years.
Continuing education
30 professional development hours per two-year renewal, at least 2 in ethics or the Act and rules; no carry-forward.
Building codes
No statewide code for private buildings; state law adopts the IRC and IBC as they existed May 1, 2012 as minimum municipal codes (Local Gov’t Code §§214.212, 214.216).
Coastal windstorm
14 coastal counties and parts of Harris County east of Highway 146; TDI certification to the 2024 IRC or IBC since April 1, 2026.
Accessibility
Projects subject to Gov’t Code ch. 469 costing $50,000 or more must be submitted to TDLR within 20 days of issuing plans, and inspected within a year of completion.
Do engineering firms need a license in Texas?
Yes. Texas requires both a licensed engineer and a registered firm. The individual rule is blunt:
“A person may not engage in the practice of engineering unless the person holds a license issued under this chapter.”
The same section bars an unlicensed person from using “engineer,” “professional engineer,” “registered engineer” or “engineered” as a business identification, or collecting a fee for engineering. Section 1001.405 then applies to the business: a sole proprietorship, firm, partnership, corporation or joint stock association may not practice engineering in Texas unless it is registered with the board and the practice is carried on only by engineers. A firm that is not registered may not use “engineering,” “engineering services” or similar terms in its name, signs, listings or advertising. Board rule 137.77 requires at least one full-time active license holder, and every licensed task in the primary, branch, remote or project office must be performed or directly supervised by a licensee.
Out-of-state firms are not excused: rule 137.77 bars any firm from offering or performing engineering for the public in Texas while it lacks a current certificate of registration. A firm that has never registered can avoid discipline by registering within 30 days of the board’s written notice, but that grace does not apply to an expired registration.
Which licenses, registrations and approvals apply to engineering work in Texas?
Credential or approval
Issued by
Who needs it
Key threshold or rule
Professional Engineer (P.E.) license
TBPELS
Anyone practicing engineering or using engineer titles
Four years of experience with a board-approved degree, eight otherwise (§1001.302); two-year renewal
Engineering firm registration
TBPELS
Any business entity offering or performing engineering in Texas
At least one full-time licensee; changes reported within 30 days (rule 137.73)
Appointed Qualified Inspector
Texas Department of Insurance (TDI)
Engineers inspecting ongoing coastal construction for a WPI-8
TDI appointment and orientation; any Texas P.E. may inspect completed construction
Windstorm certificate of compliance
TDI
Structures in the designated catastrophe areas seeking TWIA coverage
WPI-8 for ongoing work, WPI-8-E for completed work; 2024 IRC/IBC since April 1, 2026
Registered Accessibility Specialist (RAS)
Texas Department of Licensing and Regulation (TDLR)
Professionals performing state accessibility review and inspection
Inspection due by the first anniversary of completion (Gov’t Code §469.105)
Building permit
City (Houston Permitting Center, Dallas, Austin)
Construction inside city limits
Local codes built on the state minimum IRC and IBC
How do engineers get licensed and seal work in Texas?
Under §1001.302 an applicant needs a qualifying engineering or related science degree, the board’s exams and four years of active practice with an approved engineering degree, or eight years with another degree. Teaching, building another engineer’s design as a contractor, or supervising it as a foreman does not count. The application must carry at least three references from engineers. On top of the NCEES exams, every applicant completes the Texas Engineering Professional Conduct and Ethics Examination, a self-administered test that must be passed with at least 90 percent (rule 133.63).
Sealing rules are detailed. A seal may be no larger than two inches in diameter and must show the engineer’s legal name and license number (rule 137.31). Final plans must carry the seal, signature and date on every sheet; preliminary documents instead carry a statement of purpose, the engineer of record and license number, and the release date, with an explicit “not to be used for construction, bidding or permit” type note. Every document a licensee releases, including preliminary ones, must show the firm’s name and Texas registration number (rule 137.33(n)). A Texas engineer who takes over another engineer’s design must notify the first engineer in writing immediately on accepting the engagement.
When is a licensed engineer required on a Texas building project?
Section 1001.056 exempts private dwellings, one-story apartment buildings of up to eight units, two-story buildings of up to four units, farm and ranch buildings, and one-story buildings of no more than 5,000 square feet with no clear span over 24 feet, as long as no engineering is offered to the public. Two Texas-specific carve-outs matter: the exemption does not cover windstorm design or inspection for a coastal home, or slab design on expansive soil unless the work meets the IRC as applied locally. For a small building with spans over 24 feet, only the trusses, beams or roof members must be engineered.
Public work is stricter. Under §1001.407 the state or a political subdivision may not build a public work involving engineering where health, welfare or safety is involved unless an engineer prepares the plans and supervises the engineering construction. Section 1001.053 exempts only small jobs: $8,000 or less where electrical or mechanical engineering is involved, $20,000 or less otherwise, and county road maintenance.
Which building codes and accessibility rules apply in Houston, Dallas and Austin?
Texas has no statewide building code for private buildings outside cities. Inside municipalities, Local Government Code §214.212 adopts the International Residential Code, and §214.216 the International Building Code, as they existed on May 1, 2012, as minimum codes. Cities may adopt later editions and local amendments, but only by ordinance after a public hearing. The three largest permitting offices have moved well past that floor. Houston’s 2021 Houston Construction Code, approved by City Council on October 25, 2023, took effect January 1, 2024. Dallas adopted the 2021 International Code Council codes effective May 12, 2023, with the 2020 National Electrical Code. Austin’s Development Services Department adopted the 2024 IBC, IRC, IECC and IEBC, with the 2024 Uniform Mechanical and Plumbing Codes, effective July 10, 2025. Confirm the edition with the permit office for each project, and check whether the site is in a city at all; county and unincorporated work follows different rules.
How does the Texas windstorm program affect engineering on the coast?
Property in 14 coastal counties and in parts of Harris County east of Highway 146 is in a designated catastrophe area, where owners who cannot buy private windstorm and hail coverage turn to the Texas Windstorm Insurance Association (TWIA). Most structures need a TDI certificate of compliance to qualify. During construction, the inspection is done by an engineer appointed by TDI or by a TDI inspector, and TDI issues a WPI-8. For work already finished, TDI explains:
“A WPI-8-E is issued for completed construction. These inspections can be done by a Texas licensed professional engineer.”
Since April 1, 2026, windstorm applications must be certified to either the 2024 IRC or the 2024 IBC. The catastrophe areas did not change, but TDI notes most of them now sit within the windborne debris region, and it points designers to tools such as the ASCE 7 Hazard Tool to set design wind speed for each structure.
Accessibility review is statewide and sits on top of the local permit. The Architectural Barriers Act, Government Code chapter 469, and the 2012 Texas Accessibility Standards, effective March 15, 2012, are administered by TDLR. Under §469.101, plans for a covered building with an estimated construction cost of at least $50,000 must be submitted for review. The engineer or architect with overall design responsibility must submit them within 20 days, not counting weekends and holidays, of issuing them, and a local official may not accept a building permit application until the project is registered with TDLR. The owner must have the finished building inspected by TDLR, a contracted entity or a Registered Accessibility Specialist no later than the first anniversary of completion.
How do Texas public agencies hire engineers, and how are engineers paid?
By qualifications, not price. The Professional Services Procurement Act, Government Code chapter 2254, bars a governmental entity from selecting engineers on competitive bids. Section 2254.004 requires it to first select the most highly qualified provider on demonstrated competence and qualifications, then negotiate a fair and reasonable price, moving to the next-ranked firm only after formally ending talks with the first.
On private work, Property Code §53.021 gives a licensed architect, engineer or surveyor preparing a design, plan, plat, survey or specification under contract a statutory lien. For an original contractor, the lien affidavit is due by the 15th day of the fourth month after the work is completed, terminated or abandoned, or the third month on a residential project (§53.052).
How do I check an engineering firm in Texas before I sign?
Search the TBPELS engineering firm roster and confirm the firm’s registration is current; Texas does not let an unregistered firm offer engineering at all.
Look up the engineer who will seal the work and confirm an active Texas P.E. license, not an inactive or expired one.
Check that drawings and reports carry the firm’s name and Texas registration number next to the seal.
On the coast, confirm whether the site is in a designated catastrophe area and, for work in progress, that the inspecting engineer is a TDI Appointed Qualified Inspector.
For buildings covered by chapter 469 costing $50,000 or more, confirm who will register the project with TDLR and submit plans within 20 days of issue.
Ask the permit office which code edition applies; Houston, Dallas and Austin are on different cycles.
If you are a public entity, run a qualifications-based selection under Government Code chapter 2254 before talking price.
What do Exchange listings show about engineering firms in Texas?
Exchange lists 11 engineering firms in Texas as of , across 6 cities. The Dallas–Fort Worth area accounts for seven: AECOM, Jacobs and Schmidt & Stacy Consulting Engineers in Dallas, Freese and Nichols in Fort Worth, RailPros in Irving, Westwood Professional Services in Plano and Halff in Richardson. Houston has the largest single-city cluster with four: DBR Engineering Consultants, Walter P Moore, CIVE and Virtual Building Studio Inc. None of the current listings is in Austin or San Antonio.
Engineering firms on Exchange in Texas, by city
City
Listings
Houston
4
Dallas
3
Fort Worth
1
Irving
1
Plano
1
Richardson
1
Source: Exchange directory data, counted from live published listings on . A listing does not confirm TBPELS firm registration; check that on the board’s rosters. Counts change as firms join or update their listings; the live list below this guide is always current.
What has changed recently, or is about to change, for engineering firms in Texas?
Last reviewed against the primary sources listed below. Dates are effective dates unless marked otherwise.
— In force: TDI windstorm certificate applications (WPI-1) must be certified to the 2024 IRC or 2024 IBC; the designated catastrophe areas are unchanged.
— In force: Amended TBPELS rules 137.7, 137.17 and 137.75 set two-year renewal for P.E. licenses and firm registrations and a 30-hour, two-year continuing education requirement; the board is moving all expirations to the end of January or July.
— In force: SB 681 (89th Legislature), relating to the term and renewal of engineering and surveying licenses and registrations, took effect and amended §1001.405.
— In force: Austin’s 2024 International Codes, including the IBC, IRC and IECC, took effect.
Where can I verify a contractor credential and check the source in Texas?
Every figure and rule on this page can be checked against the primary source. These are the offices that publish them. Confirm current requirements directly before you rely on any of them:
11 published engineering firms with a Texas address, counted from the live Exchange directory on . The count includes consulting, structural, civil, MEP and environmental engineering firms that list engineering as a primary or secondary category.
Rules and figures
Taken only from government, statute, licensing-board and code-body pages. Each of the 12 source links in the verification section returned HTTP 200 when this page was reviewed on .
Quotations
The two quoted passages on this page are copied word for word from the linked primary source, with any omission marked by an ellipsis.
What Exchange does not do
Listings are not ranked, paid for or endorsed, and Exchange does not confirm a firm’s licence status. Check every credential with the issuing body before you sign.
Updates and corrections
The dated list under “What has changed recently” records rule changes as they are found. Firms can add or correct their own details through Add a Listing; more about the directory is on the About page.
Yes. Under Occupations Code section 1001.405 a business entity may not practice engineering in Texas, or use terms such as engineering or engineering services in its name or advertising, unless it is registered with TBPELS and the work is performed or directly supervised by a licensed engineer. Out-of-state firms must register before offering services in Texas.
How often do Texas engineering licenses and firm registrations renew?
Every two years. SB 681 took effect September 1, 2025, and amended TBPELS rules effective January 7, 2026 moved P.E. licenses and firm registrations to two-year renewal, with expirations moving to the end of January or July. Engineers need 30 professional development hours per two-year period, at least 2 in ethics or the Act and rules.
What must appear on sealed engineering documents in Texas?
Final plans need the engineer's seal, signature and date on every sheet, using a board-approved seal no larger than two inches in diameter. Every document an engineer releases, including preliminary documents, must also show the engineering firm's name and Texas registration number. Preliminary documents carry a release statement instead of a seal.
Is there a statewide building code in Texas?
Not for private buildings outside cities. Inside municipalities, Local Government Code sections 214.212 and 214.216 adopt the International Residential Code and International Building Code as they existed on May 1, 2012 as minimum codes. Cities adopt newer editions by ordinance: Houston uses its 2021 code, Dallas the 2021 ICC codes and Austin the 2024 codes.
Do I need an engineer for a windstorm inspection on the Texas coast?
In the 14 coastal counties and parts of Harris County east of Highway 146, most structures need a TDI certificate of compliance to get TWIA coverage. Ongoing construction is inspected by a TDI-appointed engineer or TDI inspector for a WPI-8; completed construction can be inspected by any Texas licensed engineer for a WPI-8-E. Since April 1, 2026 the 2024 IRC or IBC applies.
How do Texas public entities choose an engineering firm?
Government Code chapter 2254 forbids selecting engineers by competitive bid. The entity must first select the most highly qualified provider based on demonstrated competence and qualifications, then negotiate a fair and reasonable price. If talks fail, it formally ends negotiations and moves to the next most qualified firm until a contract is signed.
How many engineering firms does Exchange list in Texas?
Exchange lists 11 engineering firms in Texas across 6 cities: four in Houston, three in Dallas and one each in Fort Worth, Irving, Plano and Richardson. Seven of the 11 are in the Dallas-Fort Worth area. The live list on this page is always current, and TBPELS rosters confirm firm registration.