The top structural, mechanical, electrical and civil engineering related companiesin California.
Short answer: Exchange lists 12 engineering firms in California, two each in San Francisco and Walnut Creek and one each in Oakland, Milpitas, Los Angeles, Long Beach, Pasadena, Anaheim, Irvine and Escondido. California licenses engineers through the Board for Professional Engineers, Land Surveyors, and Geologists under the Professional Engineers Act (Bus. & Prof. Code §6700 et seq.). Civil, electrical and mechanical engineering are practice acts: only a California-licensed engineer in that branch may practice or offer the work, and a firm offering it must have one as an owner, partner or officer in charge and must file an Organization Record with the board.
Licensing board
Board for Professional Engineers, Land Surveyors, and Geologists (BPELSG), part of the Department of Consumer Affairs.
Governing law
Professional Engineers Act, Business and Professions Code §§6700–6799; Title 16, California Code of Regulations, for board rules.
Practice acts
Civil, electrical and mechanical (§6730). Nine title acts, including chemical, fire protection and traffic, restrict only the title.
Title authorities
Structural Engineer (§6736) and Geotechnical Engineer (§6736.1), both held on top of a California civil license.
California-only exams
Every civil applicant, including comity applicants, must pass the state Civil Seismic Principles and Civil Engineering Surveying exams (§6755.1).
Firm filing
Organization Record form for every business offering civil, electrical or mechanical services (§6738(h)); since January 1, 2025 it must include evidence of compliance.
Code in force
2025 California Building Standards Code (Title 24), effective January 1, 2026 through December 31, 2028.
Do engineering firms need a license in California?
Yes, for the three branches that matter most in construction. Section 6730 of the Professional Engineers Act requires anyone who practices or offers to practice civil, electrical or mechanical engineering in California, in public or private employment, to be licensed in that branch by BPELSG. The board explains the split in its applicant guidance:
“Practice act means that only a person appropriately licensed with the Board may practice or offer to practice…”
The other nine branches, agricultural, chemical, control systems, fire protection, industrial, metallurgical, nuclear, petroleum and traffic, are title acts: the work is not reserved, but only a licensee in that branch may use the title. Section 6732 also bars anyone unlicensed from using “professional engineer,” “licensed engineer,” “registered engineer” or “consulting engineer.” Structural and geotechnical are not separate licenses but title authorities layered on a civil license, and only a civil engineer who has qualified may call themselves a structural or geotechnical engineer.
There are narrow exemptions. Under §6737.1 anyone may prepare plans for woodframe single-family homes, and for buildings of up to four units, of not more than two stories and basement, unless part of the structure departs from the conventional framing rules in Title 24, in which case the building official must require that portion to be engineered or prepared by a licensed architect. Architects, federal employees and subordinates working under a licensee are also exempt.
Which licenses and approvals apply to engineering work in California?
Credential, filing or approval
Issued by
Who needs it
Key threshold or rule
Professional Engineer: civil, electrical or mechanical
BPELSG
Anyone practicing or offering those branches
Practice act (§6730); six years of qualifying experience, with up to five credited for education (§§6751, 6753)
Professional Engineer: title act branches
BPELSG
Anyone using titles such as chemical, fire protection or traffic engineer
Title protection only (§6732)
Structural Engineer authority
BPELSG
Civil engineers using the title “structural engineer”
NCEES PE Structural exam; three years of structural experience after civil licensure
Geotechnical Engineer authority
BPELSG
Civil engineers using “soil,” “soils” or “geotechnical engineer”
At least four years of geotechnical experience after civil licensure; state exam once a year
Organization Record
BPELSG
Every business offering civil, electrical or mechanical services
Licensed owner, partner or officer in charge; refiled whenever the information changes
Structural safety approval
Division of the State Architect (DSA)
Public K–12 schools, community colleges, state essential services buildings
Field Act and Title 24 review and construction oversight
Plan approval and building permit
HCAI Office of Statewide Hospital Planning and Development
Hospitals and other licensed health facilities
Approved Testing, Inspection and Observation program before the permit issues
How does an engineer get licensed in California?
An applicant must be certified as an engineer-in-training (in California or another state, or be exempt), document six years of qualifying experience, and pass the second division of the examination. A board-approved engineering degree counts as four of those years, and education credit is capped at five. Civil applicants must have gained their experience under a civil engineer.
California adds its own tests. Section 6755.1 requires the civil exam to include separate parts on seismic principles and engineering surveying, and the board delivers them as the Civil Seismic Principles and Civil Engineering Surveying exams. Applicants pass the NCEES FE and PE Civil exams first, apply through BPELSG Connect, and once the application clears technical review may request the state exams, which run quarterly; you cannot sit them in the same quarter you pay. One legacy rule is worth knowing: civil engineers with a license number of C 33965 or lower may also practice land surveying.
Licenses renew every two years on a staggered quarterly schedule (§6795). At each renewal the board administers a free online assessment on state laws and board rules under §6795.2; failing to complete it within 60 days after expiration can lead to discipline, though it does not block the renewal itself.
What rules apply to engineering businesses and contracts in California?
California does not issue a firm license, but §6738 sets conditions for any sole proprietorship, partnership, LLP, firm or corporation offering civil (including structural and geotechnical), electrical or mechanical engineering. A currently licensed engineer must be an owner, partner or officer in charge of the engineering practice, and all of that work must be done by or under the responsible charge of an engineer licensed in the right branch. Unlicensed people may be partners or officers but may not be the sole owner. If the business name contains a person’s name, that person must be a licensed engineer, land surveyor, architect or geologist. An out-of-state firm with a California branch needs a California-licensed owner, partner or officer in charge who is physically present at the branch on a regular basis.
Every such business must keep a current Organization Record on file, and since January 1, 2025 the form must arrive with documentary evidence, such as redacted tax documents, showing it meets §6738. There is no annual renewal; a new form is due whenever the information changes, and an engineer who leaves files a Disassociation Record.
Section 6749 requires a written contract, signed before work starts unless the client agrees otherwise in writing. It must describe the services, the basis of compensation and method of payment, the engineer’s license number, how extra services and termination will be handled, and whether professional liability insurance covers the engineer in responsible charge. Contracts with other licensees, contractors and public agencies are exempt. Under §6735, civil plans released for construction must be signed, sealed and dated on every sheet; interim documents must be marked “preliminary,” “not for construction” or similar.
Who reviews school and hospital projects in California?
State agencies, not the local building department. The Division of the State Architect, part of the Department of General Services, reviews plans and oversees construction for public K–12 schools, community colleges and state essential services buildings, across structural safety, fire and life safety, and accessibility.
“The Field Act establishes stringent structural safety standards for public schools to withstand earthquakes…”
DSA notes that the Field Act dates from 1933, and that even where DSA plan review is not required, a school board must still hire a licensed architect or engineer to prepare plans and must provide for inspection. Essential services buildings fall under the Essential Services Building Seismic Safety Act.
Hospitals go to the Department of Health Care Access and Information, through its Office of Statewide Hospital Planning and Development (OSHPD). After plan approval, the applicant applies for a building permit through HCAI’s e-Services Portal with contractor details, a certified Inspector of Record and a Testing, Inspection and Observation program that must be field-approved first. Hospital work also runs against the Alquist Hospital Facilities Seismic Safety Act deadline of January 1, 2030; AB 869 lets HCAI grant general acute care hospitals delays of up to three years, and up to two more to a maximum of January 1, 2035.
Which building codes and seismic retrofit rules apply in California?
Statewide, the 2025 California Building Standards Code, Title 24 of the California Code of Regulations, published July 1, 2025, took effect January 1, 2026 and runs to December 31, 2028. Part 2 is the California Building Code; the Building Standards Commission publishes errata and supplements between cycles. San Francisco’s Department of Building Inspection says permit applications filed on or after January 1, 2026 must use the 2025 California Codes and San Francisco amendments, with no grace period.
Retrofit mandates drive much structural work in the two largest coastal cities. Los Angeles Ordinances 183893 and 184081 require retrofit of wood-frame soft-story buildings of two or more stories built under pre-1978 codes with ground-floor parking or similar open space; residential buildings of three units or fewer are excluded, and a separate program covers non-ductile concrete buildings. After an Order to Comply, an owner has two years to submit proof of a prior retrofit or plans, 3.5 years to obtain a permit and seven years to finish. San Francisco runs a mandatory Soft Story program for some wood-frame multifamily buildings, with engineering criteria in Administrative Bulletin 107, and says most soft-story permits can be reviewed over the counter.
How do I check an engineering firm in California before I sign?
Look up the engineer who will be in responsible charge on BPELSG’s License Lookup through DCA Search, and confirm the license type: C for civil, E for electrical, M for mechanical.
For structural or geotechnical work, confirm the separate structural or geotechnical title authority, not just a civil license.
Ask whether the firm has a current Organization Record on file; the board will confirm by email or phone.
For a firm based outside California, confirm a California-licensed principal is in charge of its California branch.
Get the §6749 written contract before work begins, including the insurance disclosure.
For schools, community colleges or hospitals, confirm the team has delivered projects through DSA or HCAI review.
In Los Angeles or San Francisco, check whether the building is on a mandatory retrofit list before scoping the work.
What do Exchange listings show about engineering firms in California?
Exchange lists 12 engineering firms in California as of , across 10 cities. The listings split evenly between the Bay Area, with six in San Francisco, Walnut Creek, Oakland and Milpitas, and Southern California, with six in Los Angeles, Long Beach, Pasadena, Anaheim, Irvine and Escondido. San Francisco (Kennedy Jenks and Forell/Elsesser Engineers) and Walnut Creek (Brown and Caldwell and Carollo Engineers) have two each; the others include BKF Engineers in Oakland, Parikh Consultants in Milpitas, Moffatt & Nichol in Long Beach, Saiful Bouquet Structural Engineers in Los Angeles, Tetra Tech in Pasadena, Willdan Group in Anaheim, Salas O’Brien in Irvine and MTA Electrical Engineers in Escondido.
Engineering firms on Exchange in California, by city
City
Listings
San Francisco
2
Walnut Creek
2
Oakland
1
Milpitas
1
Los Angeles
1
Long Beach
1
Pasadena
1
Anaheim
1
Irvine
1
Escondido
1
Source: Exchange directory data, counted from live published listings on . A listing does not confirm a license or Organization Record; check those with BPELSG. Counts change as firms join or update their listings; the live list below this guide is always current.
What has changed recently, or is about to change, for engineering firms in California?
Last reviewed against the primary sources listed below. Dates are effective dates unless marked otherwise.
— In force: BPELSG’s fee schedule raised the license renewal fee to $250, from $180, under amended Title 16 CCR 407.
— In force: The 2025 California Building Standards Code (Title 24) took effect statewide; San Francisco applies it to permits filed from that date with no grace period.
— Deadline: Under AB 869 and HCAI Policy Intent Notice 80, general acute care hospitals seeking a delay past the 2030 seismic deadline had to file a seismic compliance plan and delay application by this date.
— In force: Organization Record forms must be accompanied by evidence of compliance with Bus. & Prof. Code §6738, or BPELSG will not process them.
Where can I verify a contractor credential and check the source in California?
Every figure and rule on this page can be checked against the primary source. These are the offices that publish them. Confirm current requirements directly before you rely on any of them:
12 published engineering firms with a California address, counted from the live Exchange directory on . The count includes consulting, structural, civil, MEP and environmental engineering firms that list engineering as a primary or secondary category.
Rules and figures
Taken only from government, statute, licensing-board and code-body pages. Each of the 12 source links in the verification section returned HTTP 200 when this page was reviewed on .
Quotations
The two quoted passages on this page are copied word for word from the linked primary source, with any omission marked by an ellipsis.
What Exchange does not do
Listings are not ranked, paid for or endorsed, and Exchange does not confirm a firm’s licence status. Check every credential with the issuing body before you sign.
Updates and corrections
The dated list under “What has changed recently” records rule changes as they are found. Firms can add or correct their own details through Add a Listing; more about the directory is on the About page.
Nearby regions and related trades
Engineer contractors in other regions: New York, Texas.
Do engineering firms need a license in California?
California does not license firms, but a business offering civil, electrical or mechanical engineering must have a California-licensed engineer as an owner, partner or officer in charge, have all of that work done under a licensee's responsible charge, and keep a current Organization Record on file with BPELSG. Since January 1, 2025 the record must include evidence of compliance.
Which engineering branches are practice acts in California?
Civil, electrical and mechanical engineering are practice acts, so only a person licensed by BPELSG in that branch may practice or offer the work. Agricultural, chemical, control systems, fire protection, industrial, metallurgical, nuclear, petroleum and traffic engineering are title acts, which protect only the title. Structural and geotechnical are title authorities held on top of a civil license.
What extra exams do civil engineers take in California?
After passing the NCEES FE and PE Civil exams and clearing BPELSG's technical review, civil applicants, including those licensed in other states, must pass two state-specific exams: Civil Seismic Principles and Civil Engineering Surveying. They are offered quarterly, and candidates cannot test in the same quarter in which they request and pay for the exams.
How do I become a structural engineer in California?
Structural Engineer is a title authority for licensed California civil engineers. An applicant must hold a valid California civil license, pass the NCEES PE Structural exam and meet the structural experience requirement in Title 16 CCR 426.10(b), which counts experience starting three years after civil licensure. Only qualified engineers may use the title structural engineer.
Who approves engineering for California schools and hospitals?
The Division of the State Architect reviews plans and oversees construction for public K-12 schools, community colleges and state essential services buildings under the Field Act and Title 24. Hospitals are approved and permitted by HCAI's Office of Statewide Hospital Planning and Development, which also administers the January 1, 2030 hospital seismic deadline and AB 869 delays.
Which building code applies in California now?
The 2025 California Building Standards Code, Title 24 of the California Code of Regulations, took effect statewide on January 1, 2026 and remains in effect through December 31, 2028. San Francisco requires permit applications filed on or after January 1, 2026 to use the 2025 California Codes and local amendments, with no grace period.
How many engineering firms does Exchange list in California?
Exchange lists 12 engineering firms in California across 10 cities: two each in San Francisco and Walnut Creek, and one each in Oakland, Milpitas, Los Angeles, Long Beach, Pasadena, Anaheim, Irvine and Escondido. Six are in the Bay Area and six in Southern California. The live list on this page is always current.