Mechanical Companies in Colorado

Short answer: Exchange lists 11 mechanical, HVAC and plumbing contractors in Colorado: 3 in Denver, 2 each in Colorado Springs and Littleton, and 1 each in Westminster, Wheat Ridge, Englewood and Federal Heights. Plumbing is the only mechanical trade Colorado licenses statewide. The State Plumbing Board licenses Residential, Journeyworker and Master Plumbers, and a plumbing contractor must register with the Board and be, or employ full time, a master plumber. HVAC contractors are licensed locally, for example by Denver and by the Pikes Peak Regional Building Department in Colorado Springs.

State licensing body
State Plumbing Board, Division of Professions and Occupations (DPO), Department of Regulatory Agencies (DORA).
Plumber experience
Residential 2 years (3,400 hours); Journeyworker up to 4 years (6,800 hours); Master 5 years (8,500 hours). Exam pass mark 70%, or 75% for Master.
Contractor registration
C.R.S. 12-155-108(3): proof of workers’ compensation and unemployment insurance compliance, and a full-time master plumber responsible for all work.
HVAC licensing
Local only. Denver: supervisor certificate (ICC exam) plus contractor license. Pikes Peak region: Mechanical Contractor A or B with $1,000,000/$2,000,000 liability insurance.
Energy code
Under HB22-1362, the Model Low Energy and Carbon Code is the minimum for any local building code update after July 1, 2026.
Lien deadlines
C.R.S. 38-22-109: notice of intent at least 10 days before filing; lien statement within 4 months of last work (2 months for day or piece labor); suit within 6 months.
Homeowner defense
C.R.S. 38-22-102(3.5): an owner of a single-family home who has paid the contractor in full has an affirmative defense to liens by unpaid subcontractors and suppliers.

Do HVAC and plumbing contractors need a license in Colorado?

Plumbers do, statewide; HVAC contractors depend on the city or county. Under C.R.S. 12-155-108, no one may work as a residential, journeyworker or master plumber without a license from DPO, and no business may operate as a plumbing contractor without registering with the State Plumbing Board. To register, the business shows it complies with Colorado’s workers’ compensation and unemployment insurance laws and either is, or employs full time, a master plumber who supervises and is responsible for all its plumbing work. A master plumber may be responsible for only one contractor at a time. Apprentices must be registered within 30 days of starting work, and the employer is responsible for that registration.

Heating and cooling equipment sits outside the plumbing law. Article 155 does not require a plumbing license for building heating appliances and systems or for air conditioning installations, and DORA’s permit program covers only electrical and plumbing work. HVAC credentials therefore come from local building departments. Gas piping is different: the state plumbing permit rules cover “any plumbing or gas piping installation”, so a furnace swap that touches gas piping can involve both a plumbing-side and a mechanical-side credential depending on the jurisdiction. Homeowners may do plumbing on their own residence without a license, but not on property built for sale, rentals or commercial buildings.

Which licenses, registrations and permits apply in Colorado?

Credential or permitIssued byWho needs itKey threshold or rule
Residential, Journeyworker or Master Plumber licenseState Plumbing Board (DPO)Anyone working as a plumber3,400 / 6,800 / 8,500 hours; exam on the IPC, IFGC and Board rules; 8 hours of CE each license year
Plumbing contractor registrationState Plumbing BoardAny business contracting plumbing workWorkers’ compensation and unemployment compliance; responsible master plumber; numbers displayed on vehicles, bids, bills and website
Plumbing apprentice registrationState Plumbing BoardEvery unlicensed person in the tradeWithin 30 days of hire; employer responsible
Supervisor certificate (e.g. Heating and Ventilating Class A or Class B)Denver Community Planning and DevelopmentRequired before a Denver mechanical contractor licenseClass A: 8 years and ICC exam F29; Class B (residential only): 6 years and ICC exam F32; renew every 3 years
Denver contractor licenseDenver Community Planning and DevelopmentContractors pulling Denver permitsApplicant must hold a supervisor certificate or a state electrical or plumbing license, or employ someone who holds a supervisor certificate
Mechanical Contractor A (commercial) or B (residential)Pikes Peak Regional Building DepartmentGas piping and HVAC work in Colorado Springs, El Paso County and member townsGeneral liability $1,000,000 per occurrence / $2,000,000 aggregate; employees must also hold PPRBD licenses
State plumbing permitDPOPlumbing and gas piping where no local inspection program existsContractor applies; state inspection within 3 working days of request

How do I check a mechanical contractor in Colorado before I sign?

  1. Look up the plumbing contractor registration and the responsible master plumber’s license in DORA’s license lookup. Since mid-2025 both numbers must appear on the company’s vehicles, bids, bills and website, so a missing number is a warning sign.
  2. For heating and cooling work, confirm the local license: a Denver contractor license backed by the right supervisor certificate, or a PPRBD Mechanical Contractor A or B license in the Pikes Peak region, which you can check in PPRBD’s contractor search.
  3. Ask who will pull the permit. DPO’s homeowner notice says the contractor is responsible for obtaining it, and that it is a violation of state law for anyone other than the homeowner who is not a registered plumbing contractor to install plumbing on your property.
  4. Ask for a certificate of liability insurance naming you. In the Pikes Peak region mechanical and plumbing contractors must carry at least $1,000,000 per occurrence and $2,000,000 aggregate.
  5. Get the scope in writing, including whether the bid covers gas piping, electrical connections and the energy code items the local department will inspect.
  6. Keep the notice of lien law that the permit office mails on a residential remodel permit, and collect lien waivers, or pay by joint check, as the job proceeds.

Who issues plumbing and mechanical permits in Denver, Colorado Springs and the suburbs?

Mostly the local building department; the state steps in only where no local program exists. DPO says it does not inspect plumbing in jurisdictions with their own plumbing inspection program, and lists counties that do, including Adams (except Federal Heights), Arapahoe (except Bow Mar and Sheridan), Denver, Douglas, El Paso, Jefferson, Boulder, Broomfield, Larimer and Weld. That means a plumbing job in Federal Heights, where one Exchange-listed firm is based, is permitted and inspected by the state, while jobs in Denver, Littleton, Englewood, Wheat Ridge or Westminster go through the city or county.

Denver licenses contractors in two steps: a person first earns a supervisor certificate by documenting experience and passing an ICC exam, then the company applies for a contractor license. A Heating and Ventilating Class A supervisor needs eight years of commercial heating and ventilating work, four as a journeyman; the residential-only Class B needs six. Supervisor certificates renew every three years.

In Colorado Springs, El Paso County, Fountain, Woodland Park, Manitou Springs, Monument, Green Mountain Falls, Palmer Lake and Calhan, the Pikes Peak Regional Building Department licenses Mechanical Contractor A for any structure and Mechanical Contractor B for one- and two-family dwellings up to three stories. PPRBD registers state-licensed master plumbers rather than issuing a separate plumbing license, and requires the insurance certificate to name PPRBD as holder with 10 days’ notice of cancellation.

Which plumbing, mechanical and energy codes apply in Colorado?

The State Plumbing Board writes the Colorado Plumbing Code, the statewide minimum; local governments may amend it only to be at least as strict. Licensing exams are based on the International Plumbing Code and International Fuel Gas Code as adopted by the Board, which moved to the 2021 editions in 2023. Above that floor, local codes vary. Denver adopted the 2025 Denver Building and Fire Codes on June 13, 2025, incorporating the 2024 International Mechanical, Plumbing and Fuel Gas Codes, but keeping the 2021 International Energy Conservation Code. PPRBD enforces the 2023 Pikes Peak Regional Building Code, built on the 2021 IMC, IFGC, IPC and IECC plus Colorado’s Model Electric Ready and Solar Ready Code.

Energy codes are now set by state law. HB22-1362 required local governments that update a building code between July 1, 2023 and June 30, 2026 to adopt at least the 2021 IECC plus the model electric and solar ready code. The next step took effect this year:

“The Model Low Energy and Carbon Code, … becomes Colorado’s new minimum energy code on July 1, 2026.”

— Colorado Energy Office — Model Low Energy and Carbon Code announcement

The model code is based on the 2024 IECC with Colorado amendments, and applies when a city or county next updates any building code. The Energy Office says it does not make building with gas harder, but that high-efficiency electric heating and water heating will often be the most cost-effective option. Where an energy code conflicts with the Colorado Plumbing Code, HB22-1362 says the plumbing code prevails.

Does Energize Denver require a heat pump?

No. Energize Denver is a building performance policy for larger buildings, and the city states plainly that it is not a requirement to electrify heating or cooling or to replace HVAC equipment before the end of its useful life.

It covers commercial and multifamily buildings of 5,000 square feet and larger, with separate requirements for small buildings (5,000 to 24,999 square feet) and large buildings (25,000 square feet and up). Owners of those buildings must meet energy-efficiency requirements, with flexible timelines and compliance options; the city’s Energize Denver Navigation Center helps them plan. A single-family homeowner replacing a furnace in Denver deals instead with the Denver Building Code and Denver Energy Code through a normal mechanical permit; the city has begun a process to update its Energy Code.

What mechanic’s lien rules apply to mechanical work in Colorado?

Colorado’s mechanic’s lien law, C.R.S. Title 38, Article 22, runs on short deadlines. A claimant must serve a notice of intent to file a lien on the owner and the prime contractor at least ten days before filing the lien statement with the county clerk and recorder. Most claimants must file within four months after they last performed labor or furnished materials; workers paid by the day or piece have two months after completion of the improvement. A lien stops holding the property unless an action to enforce it is started within six months after the last work or completion.

Homeowners have a strong defense. Under C.R.S. 38-22-102(3.5), it is an affirmative defense that the owner of an existing single-family home, or a single-family owner-occupied residence, has already paid the contractor the full contract amount plus change orders. Permit offices must mail a notice of this rule when they issue a residential remodeling permit, and the notice suggests lien waivers or checks payable jointly to the contractor, subcontractor and supplier.

What do Exchange listings show about mechanical contractors in Colorado?

Exchange lists 11 mechanical, HVAC and plumbing contractors in Colorado as of , across 7 cities. Nine of the 11 are in the Denver metro area; the other 2 are in Colorado Springs. By category, 5 list plumbing, 3 list HVAC and 3 are mechanical contractors: MTech Mechanical in Westminster, Express Pros Heating Cooling Electric in Wheat Ridge and B&L Plumbing in Colorado Springs.

Mechanical, HVAC and plumbing contractors on Exchange in Colorado, by city
CityListings
Denver3
Colorado Springs2
Littleton2
Westminster1
Wheat Ridge1
Englewood1
Federal Heights1

Source: Exchange directory data, counted from live published listings on . Counts include HVAC and plumbing firms grouped under the mechanical trade. Counts change as firms join or update their listings; the live list below this guide is always current.

What has changed recently, or is about to change, for mechanical contractors in Colorado?

Last reviewed against the primary sources listed below. Dates are effective dates unless marked otherwise.

  • — Upcoming: Colorado plumbing licenses move from a two-year to a three-year renewal period, with the new expiration date in 2030, under HB24-1344.
  • — In force: The Model Low Energy and Carbon Code became the minimum energy code for any city or county that updates a building code after this date (HB22-1362).
  • — In force: The 2023 Pikes Peak Regional Building Code, 2nd Printing, became the code across PPRBD’s jurisdiction.
  • — In force: The Journeyman Plumber license became the Journeyworker Plumber license, and plumbing contractors must now display their registration number and their master plumber’s license number. The Plumbing Board puts it this way:

“After June 30, 2025, contractors are required to display their plumbing contractor registration number …”

— Colorado DPO — Colorado Plumbing News, HB24-1344 updates

Where can I verify a contractor credential and check the source in Colorado?

Every figure and rule on this page can be checked against the primary source. These are the offices that publish them. Confirm current requirements directly before you rely on any of them:

Colorado DORA — License lookup; Colorado DPO — State Plumbing Board; Colorado DPO — Plumbing applications and licensure requirements; Colorado DPO — Electrical and plumbing permits and inspection areas; Colorado General Assembly — C.R.S. Title 12, Article 155 (plumbers); Colorado General Assembly — C.R.S. Title 38, Article 22 (mechanics’ liens); Colorado General Assembly — HB22-1362 Building Greenhouse Gas Emissions; Colorado Energy Office — Building energy codes; Denver Community Planning and Development — Mechanical certificates; Denver Community Planning and Development — Building and fire codes; Pikes Peak Regional Building Department — License types; Pikes Peak Regional Building Department — Contractor and mechanic search.

How was this page compiled?

Listings counted
11 published mechanical contractors with a Colorado address, counted from the live Exchange directory on . Exchange files HVAC, plumbing and fire-protection firms under mechanical, so the count includes them alongside firms that list mechanical contracting directly.
Rules and figures
Taken only from government, statute, licensing-board and code-body pages. Each of the 12 source links in the verification section returned HTTP 200 when this page was reviewed on .
Quotations
The two quoted passages on this page are copied word for word from the linked primary source, with any omission marked by an ellipsis.
What Exchange does not do
Listings are not ranked, paid for or endorsed, and Exchange does not confirm a firm’s licence status. Check every credential with the issuing body before you sign.
Updates and corrections
The dated list under “What has changed recently” records rule changes as they are found. Firms can add or correct their own details through Add a Listing; more about the directory is on the About page.

Mechanical contractors in other regions: Alberta, Arizona, British Columbia, California, Florida, Georgia, Illinois, Indiana, Maryland, New South Wales, North Carolina, Ontario, Pennsylvania, Queensland, South Carolina, Texas, Virginia, Washington.

Other trades in Colorado: Electrical, General Contracting, Plumbing, Renovation & Remodeling, Roofing & Waterproofing.

Jump to licence verification sources for Mechanical in Colorado, or back to all mechanical contractors on Exchange.

Frequently asked questions

Do HVAC contractors need a state license in Colorado?

No. Colorado licenses plumbers and electricians statewide, but the plumbing law does not require a license for building heating systems or air conditioning installations. HVAC contractors are licensed locally instead, for example through Denver's supervisor certificate and contractor license, or PPRBD's Mechanical Contractor A and B licenses in the Colorado Springs area.

What plumbing licenses does Colorado issue?

The State Plumbing Board issues Residential, Journeyworker and Master Plumber licenses, requiring 3,400, up to 6,800 and 8,500 hours of experience. The exam pass mark is 70 percent, or 75 percent for Master. Licensees complete 8 hours of continuing education each license year, and contractors must register with the Board and employ a master plumber.

How do I verify a Colorado plumbing contractor?

Search the company and its responsible master plumber in DORA's online license lookup. Since mid-2025, plumbing contractors must display their registration number and their master plumber's license number on vehicles, bids, billing materials and their website, so ask about any missing number. In the Pikes Peak region, also check PPRBD's contractor search.

Who inspects plumbing work in Colorado?

Usually the local building department. The state plumbing program inspects only where there is no local plumbing inspection program; DPO lists counties with their own programs, including Denver, El Paso, Jefferson, Douglas and Arapahoe, and Adams except Federal Heights. Where the state inspects, it must do so within three working days of a request.

What is Colorado's Model Low Energy and Carbon Code?

It is the energy code required by HB22-1362. Based on the 2024 IECC with Colorado amendments, it became the state's minimum energy code on July 1, 2026, so any city or county updating a building code after that date must adopt it or something stronger. It does not ban gas equipment.

Does Energize Denver force me to replace my furnace with a heat pump?

No. Energize Denver applies to commercial and multifamily buildings of 5,000 square feet and larger, and the city says it is not a requirement to electrify heating or cooling or to replace HVAC equipment before the end of its useful life. Single-family furnace replacements follow the Denver Building and Energy Codes.

How many mechanical contractors does Exchange list in Colorado?

Exchange lists 11 mechanical, HVAC and plumbing contractors in Colorado: 3 in Denver, 2 each in Colorado Springs and Littleton, and 1 each in Westminster, Wheat Ridge, Englewood and Federal Heights. Five list plumbing, three HVAC and three are mechanical contractors. The live list on this page is always current.
MTech Mechanical logo

MTech Mechanical

PlumbSmart Plumbing — Plumbing

PlumbSmart Plumbing

Express Pros Heating Cooling Electric — Mechanical

Express Pros Heating Cooling Electric

MileHi HVAC Contractor Denver CO — HVAC

MileHi HVAC Contractor Denver CO

American Leak Detection of Metro Denver — Plumbing

American Leak Detection of Metro Denver

Simply Sewers - a Littleton Drain Cleaning Company — Plumbing

Simply Sewers – a Littleton Drain Cleaning Company

Afterhours Plumbing & Drainage Services — Plumbing

Afterhours Plumbing & Drainage Services

UniColorado Heating & Cooling — HVAC

UniColorado Heating & Cooling

Action Air Duct — HVAC

Action Air Duct

JD's Denver Plumbing, Heating and Air Conditioning — Plumbing

JD’s Denver Plumbing, Heating and Air Conditioning

B&L Plumbing — Mechanical

B&L Plumbing

Loading…