Mechanical Companies in Alberta

Short answer: Exchange lists 14 mechanical, HVAC and plumbing contractors in Alberta: 10 in Calgary, 2 in Edmonton and 2 in St. Albert. The rule that matters most is trade certification. Plumber, Gasfitter (Class A and Class B), Refrigeration and Air Conditioning Mechanic, Sheet Metal Worker and Steamfitter-Pipefitter are compulsory trades, so their restricted work must be done by a certified journeyperson or a registered apprentice. Gas, plumbing and building work also needs a permit under the Safety Codes Act, and a contractor who takes a deposit for work on your home needs a prepaid contracting licence.

Trade certification
Compulsory trades under the Skilled Trades and Apprenticeship Education Act, administered by Alberta Apprenticeship and Industry Training (AIT); check any worker with the Tradesperson Lookup Tool.
Gasfitter classes
Gasfitter – Class A is required to work on appliances over 400,000 BTU; Class B covers equipment up to 400,000 BTU.
Permits
Issued under the Safety Codes Act by accredited municipalities, such as Calgary and Edmonton, or by agencies working under the Alberta Safety Codes Authority in non-accredited areas.
Codes in force
National Plumbing Code of Canada 2020 (since April 1, 2023); National Building Code – 2023 Alberta Edition and NECB 2020 (since May 1, 2024); CSA B149.1:25 gas code (since March 1, 2026).
Prepaid contracting licence
Service Alberta and Red Tape Reduction; $78 fee, security required, 12-month term (AR 185/1999).
Lien deadline
60 days from last materials or services; 90 days for concrete work and oil or gas well sites (Prompt Payment and Construction Lien Act, s. 41).
Prompt payment
Owners pay a proper invoice within 28 days (dispute notice within 14); contractors pay subcontractors within 7 days of being paid.

Do mechanical, HVAC and plumbing contractors need a licence in Alberta?

Alberta does not license “mechanical contractors” as a single trade. It certifies the people who do the work, and it permits the work itself. Under the Skilled Trades and Apprenticeship Education Act, in force since July 20, 2022, the Plumber, Gasfitter – Class A, Gasfitter – Class B, Refrigeration and Air Conditioning Mechanic, Sheet Metal Worker and Steamfitter-Pipefitter trades are all compulsory certification trades. To perform the restricted activities of those trades, a person must be a certified journeyperson, hold a recognized trade certificate, or be a registered apprentice working under the supervision of a certified journeyperson.

For a homeowner hiring an HVAC company, the practical consequence is that the person running gas to a new furnace must be a certified gasfitter, and the person altering drain or water piping must be a certified plumber or a supervised apprentice. Gasfitter – Class B covers residential furnaces and other equipment up to 400,000 BTU; anything larger, typical of commercial boilers and rooftop units, needs a Class A gasfitter.

The business may also need a prepaid contracting licence, a municipal business licence (Edmonton requires one) and WCB-Alberta coverage.

Which certificates, licences and permits apply in Alberta?

Credential or permitIssued byWho needs itKey threshold or rule
Plumber journeyperson certificateAITAnyone performing restricted plumbing activitiesCompulsory trade; 4-period apprenticeship
Gasfitter – Class A / Class BAITAnyone installing or servicing gas piping and appliancesClass A required above 400,000 BTU; Class B up to 400,000 BTU
Refrigeration and Air Conditioning MechanicAITRestricted refrigeration and air conditioning workCompulsory trade; 4-period apprenticeship
Sheet Metal Worker; Steamfitter-PipefitterAITDuctwork and process or heating pipingBoth compulsory trades; 4-period apprenticeships
Restricted Certificate of Competency “R”Municipal AffairsContractors installing sewer and water servicesHolders of PS or RPS private sewage certificates also qualify
Prepaid contracting business licenceService Alberta and Red Tape ReductionBusinesses taking payment before finishing work on a private dwelling$78 fee; security; 12-month term; commercial work exempt
Gas, plumbing and building permitsAccredited municipality or agencyInstallations and alterations under the Safety Codes ActCalgary: all plumbing and gas installations; Edmonton: $120 plus $4.80 safety code fee for trade permits on existing single detached homes
WCB-Alberta clearance letterWCB-AlbertaAnyone hiring a contractorGet it before hiring and before releasing payment

How do I check a mechanical contractor in Alberta before I sign?

  1. Ask for the names of the people who will do the gas, plumbing and refrigeration work, and check each one in the AIT Tradesperson Lookup Tool, which shows whether a person holds an Alberta journeyperson certificate or is a registered apprentice, and in which trade.
  2. For a commercial boiler or rooftop unit, confirm a Gasfitter – Class A is on the job, since Class B stops at 400,000 BTU.
  3. If the company wants a deposit for work on your home, confirm its prepaid contracting licence in Service Alberta’s licensed-business search and ask to see the salesperson’s identification card, which must show the licence number.
  4. Confirm in writing who will pull the gas and plumbing permits. In Calgary and Edmonton the contractor normally applies; homeowner gas permits are tightly limited.
  5. Get a WCB-Alberta clearance letter before you hire and again before you release payment; without one you may be liable for unpaid premiums.
  6. For a prepaid contract over $200, make sure the written contract sets out the materials and the work, and that you receive a signed copy on or before the day work starts or within 10 days of signing, whichever is first.
  7. On larger jobs, note the 60-day lien period and the 10% holdback before making the final payment.

When do you need a gas, plumbing or HVAC permit in Calgary and Edmonton?

Almost always, if anything is installed or altered. The province puts the duty on the owner:

“Primary responsibility for safety codes compliance rests with the owner of the building or installation in question.”

— Government of Alberta — Permits and Alberta’s Safety Code System

Permits come from municipalities accredited to administer the Safety Codes Act, or, in non-accredited areas, from agencies working under the Alberta Safety Codes Authority, a division of the Safety Codes Council. Outside Calgary and Edmonton, including St. Albert, check the Council’s permit pages for the right office.

Calgary is the strictest on paper:

“All plumbing and gas installations require permits, including installations for renovation work.”

— City of Calgary — Plumbing and gas permits

Calgary issues separate furnace replacement permits for HVAC contractors, hydronic permits for hot-water heating and temporary gas permits for construction heaters. Homeowners may apply for every permit type except gas, unless the homeowner is an Alberta-certified journeyman gasfitter living in the single-family home. Gas lines to a fireplace need their own gas permit and must be run by a certified gasfitter.

Edmonton requires a plumbing permit to install or alter fixtures, water piping, drains, backwater valves and backflow preventers, but not to replace a fixture like for like in the same location, and a gas permit to install, alter or relocate furnaces, water heaters, piping, heaters, fireplaces and other gas equipment. Homeowners may not install a new gas line, new-home plumbing and gas work must be done by a licensed mechanical contractor, and contractors must be licensed with the City of Edmonton. Trade permits for renovations to an existing house cost $120 plus a $4.80 safety code fee through December 31, 2026.

Which codes apply to mechanical work in Alberta?

Alberta adopts the national model codes, sometimes with an Alberta edition, and each discipline has its own in-force date. For plumbing it is the National Plumbing Code of Canada 2020, in force since April 1, 2023. For buildings, including ventilation and the energy rules for houses, it is the National Building Code – 2023 Alberta Edition, declared in force May 1, 2024, with a second printing published August 17, 2026; larger buildings also follow the National Energy Code of Canada for Buildings 2020.

Gas work follows the CSA B149 series. CSA B149.1:25, the Natural gas and propane installation code, and CSA B149.2:25, the Propane storage and handling code, were declared in force on March 1, 2026, replacing the 2020 editions that had applied since February 1, 2021. A furnace or water heater installed after that date falls under the 2025 edition.

What does Alberta’s prepaid contracting rule mean for furnace and water heater sales?

It bans the classic door-to-door furnace pitch. Under section 8.1 of the Prepaid Contracting Business Licensing Regulation, a prepaid contracting business may not solicit, negotiate or conclude a prepaid contract at your home for furnaces, air conditioners, water heaters, windows or energy audits unless you invited it first, expressly, by phone, e-mail, text, through its website or in person at its place of business. A company invited in for an energy audit may not sell you any of those products during the same visit. A breach is both an offence and an unfair practice under the Consumer Protection Act.

The licence applies to any business that solicits or concludes prepaid contracts away from its own premises and takes money before the work is finished, for building, repairing or improving a private dwelling. Contracts for commercial buildings and between contractors and subtrades are exempt. Applicants supply a criminal record check, a security and their standard contracts. For contracts worth more than $200 the contract must meet section 35 of the Act and describe the materials and work. Service Alberta’s search tool lets you confirm the licence before you pay.

How do Alberta winters change a heating or plumbing job?

Several of the Calgary listings on Exchange advertise 24/7 emergency service for burst and frozen pipes, sewer backups and water heater failures, the calls that peak in an Alberta winter. Emergency work is still permitted work. A furnace swap at midnight still needs the furnace replacement or gas permit afterwards, and a burst-pipe repair that alters piping still needs a plumbing permit.

Cold weather also drives construction heat. Calgary requires permits for propane, natural gas and heater installations on construction sites, with a safety codes officer visit. In November 2026 Calgary also had city-wide Stage 4 outdoor water restrictions while crews connected the Bearspaw South Feeder Main, so check current restrictions before scheduling flushing, testing or commissioning work.

What lien and prompt payment rules apply in Alberta?

The Prompt Payment and Construction Lien Act sets both. A lien for materials or services must generally be registered within 60 days of the day the last materials were furnished or the services were completed, or the contract was abandoned; the period is 90 days for improvements primarily related to concrete and for oil or gas well sites. Owners must retain a 10% holdback on the value of work done, held for 60 days after a certificate of substantial performance is issued, which funds any valid liens.

Part 3 sets payment deadlines. An owner must pay a proper invoice no later than 28 days after receiving it, unless within 14 days it gives the contractor a notice of dispute that states the amount withheld and every reason. A contractor paid by the owner must pay each subcontractor within 7 days, and proper invoices must be issued at least every 31 days unless the contract makes testing and commissioning a condition.

What do Exchange listings show about mechanical contractors in Alberta?

Exchange lists 14 mechanical, HVAC and plumbing contractors in Alberta as of , across 3 cities. Calgary dominates with 10 of the 14 listings; the other 4 are in the Edmonton area, split evenly between Edmonton and St. Albert. By category, 6 list plumbing only, 3 list HVAC only, 1 (Hansen Plumbing and Heating Calgary) lists both, and 4 are mechanical contractors: Arpis Industries and DMT Mechanical Ltd in Calgary, Schendel Mechanical Contracting in Edmonton and Ram Mechanical in St. Albert.

Mechanical, HVAC and plumbing contractors on Exchange in Alberta, by city
CityListings
Calgary10
Edmonton2
St. Albert2

Source: Exchange directory data, counted from live published listings on . Counts include HVAC and plumbing firms grouped under the mechanical trade. Counts change as firms join or update their listings; the live list below this guide is always current.

What has changed recently, or is about to change, for mechanical contractors in Alberta?

Last reviewed against the primary sources listed below. Dates are effective dates unless marked otherwise.

  • — Published: The second printing of the National Building Code – 2023 Alberta Edition became the version in force.
  • — In force: CSA B149.1:25 (natural gas and propane installation) and CSA B149.2:25 (propane storage and handling) replaced the 2020 editions.
  • — In force: Edmonton’s residential trade permit fee of $120 plus a $4.80 safety code fee for renovations outside a House Combo Permit, effective through December 31, 2026.
  • — In force: National Building Code – 2023 Alberta Edition and National Energy Code of Canada for Buildings 2020 replaced the 2019 and 2017 editions.

Where can I verify a contractor credential and check the source in Alberta?

Every figure and rule on this page can be checked against the primary source. These are the offices that publish them. Confirm current requirements directly before you rely on any of them:

Alberta Apprenticeship and Industry Training — Tradesperson Lookup Tool; Alberta Apprenticeship and Industry Training — Compulsory certification trades; Service Alberta — Find out if a business is licensed; Alberta King’s Printer — Prepaid Contracting Business Licensing Regulation (AR 185/1999); Alberta King’s Printer — Prompt Payment and Construction Lien Act; Alberta King’s Printer — Safety Codes Act; Government of Alberta — Permits and Alberta’s Safety Code System; Government of Alberta — Gas codes and standards; Government of Alberta — Plumbing codes and standards; City of Calgary — Plumbing and gas permits; City of Edmonton — Gas permit; WCB-Alberta — Clearance letters.

How was this page compiled?

Listings counted
14 published mechanical contractors with a Alberta address, counted from the live Exchange directory on . Exchange files HVAC, plumbing and fire-protection firms under mechanical, so the count includes them alongside firms that list mechanical contracting directly.
Rules and figures
Taken only from government, statute, licensing-board and code-body pages. Each of the 12 source links in the verification section returned HTTP 200 when this page was reviewed on .
Quotations
The two quoted passages on this page are copied word for word from the linked primary source, with any omission marked by an ellipsis.
What Exchange does not do
Listings are not ranked, paid for or endorsed, and Exchange does not confirm a firm’s licence status. Check every credential with the issuing body before you sign.
Updates and corrections
The dated list under “What has changed recently” records rule changes as they are found. Firms can add or correct their own details through Add a Listing; more about the directory is on the About page.

Mechanical contractors in other regions: Arizona, British Columbia, California, Colorado, Florida, Georgia, Illinois, Indiana, Maryland, New South Wales, North Carolina, Ontario, Pennsylvania, Queensland, South Carolina, Texas, Virginia, Washington.

Other trades in Alberta: Electrical, General Contracting, Roofing & Waterproofing.

Jump to licence verification sources for Mechanical in Alberta, or back to all mechanical contractors on Exchange.

Frequently asked questions

Do HVAC and plumbing contractors need a licence in Alberta?

The workers need trade certificates. Plumber, Gasfitter Class A and B, Refrigeration and Air Conditioning Mechanic, Sheet Metal Worker and Steamfitter-Pipefitter are compulsory trades, so restricted work must be done by a certified journeyperson or a registered apprentice. A business that takes deposits for home work also needs a prepaid contracting licence, and Edmonton requires contractors to be licensed with the City.

What is the difference between a Class A and Class B gasfitter in Alberta?

Both are compulsory certification trades administered by Alberta Apprenticeship and Industry Training. A Gasfitter Class B may work on natural gas and propane equipment up to 400,000 BTU, which covers typical residential furnaces and water heaters. Gasfitter Class A certification is required for appliances above 400,000 BTU, such as larger commercial boilers.

Do I need a permit to replace a furnace or water heater in Calgary or Edmonton?

Yes. Calgary requires permits for all plumbing and gas installations and has a specific furnace replacement permit for HVAC contractors. Edmonton requires a gas permit to install, alter or relocate furnaces, water heaters and other gas equipment, and homeowners there may not install a new gas line. Your contractor normally applies for the permit.

Can a company sell me a furnace at my door in Alberta?

Not unless you invited it. The Prepaid Contracting Business Licensing Regulation bars soliciting, negotiating or concluding a contract at your home for furnaces, air conditioners, water heaters, windows or energy audits without an express invitation made beforehand by phone, e-mail, text, website or at the business. An energy auditor cannot sell those products during the audit visit.

Which gas code applies in Alberta in 2026?

CSA B149.1:25, the Natural gas and propane installation code, was declared in force in Alberta on March 1, 2026, together with CSA B149.2:25 for propane storage and handling. They replaced the 2020 editions in force since February 1, 2021. Plumbing follows the National Plumbing Code of Canada 2020, in force since April 1, 2023.

How long does a contractor have to register a lien in Alberta?

Under section 41 of the Prompt Payment and Construction Lien Act, a lien for materials or services must generally be registered within 60 days of the last materials furnished or services completed, or abandonment of the contract. The period is 90 days for concrete work and oil or gas well sites. Owners also keep a 10% holdback.

How many mechanical contractors does Exchange list in Alberta?

Exchange lists 14 mechanical, HVAC and plumbing contractors in Alberta: 10 in Calgary, 2 in Edmonton and 2 in St. Albert. Six list plumbing only, three HVAC only, one both, and four are mechanical contractors. The live list on this page is always current as firms join or update their listings.
Calgary Emergency Plumbers — Plumbing

Calgary Emergency Plumbers

Modern PURAIR Calgary — HVAC

Modern PURAIR Calgary

Plumber Calgary NW — Plumbing

Plumber Calgary NW

Canadian Power Vac

Plumbing and Heating Paramedics — Plumbing

Plumbing and Heating Paramedics

Aire Serv of Calgary South — HVAC

Aire Serv of Calgary South

Mr. Rooter Plumbing of Calgary — Plumbing

Mr. Rooter Plumbing of Calgary

Hansen Plumbing and Heating Calgary — HVAC

Hansen Plumbing and Heating Calgary

ProStar Plumbing & Heating — Plumbing

ProStar Plumbing & Heating

Peak Sewer & Underground Services Ltd. — Plumbing

Peak Sewer & Underground Services Ltd.

Ram Mechanical — Mechanical

Ram Mechanical

Arpis Industries — Mechanical

Arpis Industries

DMT Mechanical Ltd — Mechanical

DMT Mechanical Ltd

Schendel Mechanical Contracting — Mechanical

Schendel Mechanical Contracting

Loading…