HVAC Companies in Kentucky

Short answer: Exchange lists 5 HVAC contractors in Kentucky, four in Louisville and one in eastern Kentucky. HVAC work in Kentucky is licensed statewide by the Department of Housing, Buildings and Construction under KRS 198B.650 to 198B.689. A company must have a licensed master HVAC contractor in responsible charge, carry at least $500,000 in general liability and $300,000 in property damage insurance, and pull a permit before installing any initial system. In Louisville, the contractor also needs a Metro HVAC contractor's license and a Metro permit, including for replacements.

Licensing agency
The Kentucky Department of Housing, Buildings and Construction (HBC), Division of HVAC, licenses masters and journeymen and registers apprentices.
Governing law
KRS 198B.650 to 198B.689 and 815 KAR Chapter 8.
Company rule
Every firm doing HVAC contracting must have a licensed master HVAC contractor in responsible charge as an employee or subcontractor.
Insurance
At least $500,000 general liability and $300,000 property damage; a license is not valid without it.
Codes in force
2018 Kentucky Building Code and Residential Code (based on the 2015 IBC and IRC) and the 2015 IMC; current editions effective December 3, 2024.
Lien deadline
File with the county clerk within six months of last work or materials and mail the owner a copy within seven days.

Who licenses and regulates HVAC contractors in Kentucky?

Kentucky regulates heating, ventilation and air conditioning work at the state level. The Department of Housing, Buildings and Construction, usually shortened to HBC and part of the Public Protection Cabinet in Frankfort, administers the HVAC licensing law in KRS 198B.650 to 198B.689 through its Division of HVAC. The same department licenses plumbers, electricians and boiler contractors and enforces the statewide building code, so most of the rules an HVAC job touches come from one agency.

The statute covers the installation, maintenance, altering, remodeling or repair of heating, ventilation, hydronic and cooling systems and burner service. Duct cleaning alone is not HVAC contracting, but anyone who cuts an access hole in a duct must be a licensed and insured Kentucky contractor and must restore the duct before leaving.

Under KRS 198B.686, practicing without a required license, or advertising as a licensed master or journeyman without one, is a Class A misdemeanor, and each violation is a separate offense. KRS 198B.670 requires the master license number to appear in all advertising and on every vehicle used for HVAC work, which gives owners a quick first check.

Under KRS 198B.674, the law does not apply to an individual working on property they own and occupy, to residential window unit work, to full-time maintenance staff doing routine maintenance for their employer, or to licensed electricians working on a system's electrical units. Routine maintenance excludes major repairs, defined as complete replacement of a furnace, condensing unit, heat pump, fan coil unit, chiller system or certain heating boilers.

What HVAC license types exist in Kentucky and what experience do they require?

Kentucky issues two HVAC licenses and one apprentice certificate. A master HVAC contractor may advertise and practice HVAC contracting, obtain permits and is primarily responsible for the work. A journeyman HVAC mechanic works under a master's supervision. An apprentice assists under the supervision of both.

Under KRS 198B.658, applicants for either license must be at least 18, be a U.S. citizen or a resident alien authorized to work, and pass a department examination. A journeyman needs two years in the trade under a master HVAC contractor, or two years of verifiable HVAC work elsewhere. A master needs two years as a journeyman under a master, two years as a master or equivalent in another jurisdiction, or two years as a licensed mechanical engineer. Under 815 KAR 8:010, a year of experience means at least 1,500 hours of HVAC work in a continuous 12-month period.

The passing score is 70 percent. Under 815 KAR 8:010, a master pays a $150 exam fee and a $250 license fee, and a journeyman pays $50 for each.

Licenses renew every year by the last day of the licensee's birth month under KRS 198B.664, with a 60-day grace period and a restoration fee; after that the license terminates. Renewal costs $250 for a master and $50 for a journeyman, and 815 KAR 2:010 requires six hours of approved continuing education a year. Masters must file proof of insurance at every renewal.

Apprentices register free with HBC on Form HVAC 3, signed by the supervising master. Under 815 KAR 8:030 and 8:010, an apprentice works under the direct supervision of a journeyman, who must be physically on site and personally responsible for each apprentice, and the general supervision of a master.

Under KRS 198B.678, a master can represent only one company unless the master lives in Kentucky and owns at least 25 percent of each company.

Which licenses, permits and registrations apply in Kentucky?

Licence / permit / registrationIssued byWho needs itKey threshold or rule
Master HVAC contractor licenseKentucky HBC, Division of HVACThe person in responsible charge of any company doing HVAC contractingTwo years as a journeyman (or equivalent), exam, required insurance; renews yearly
Journeyman HVAC mechanic licenseKentucky HBC, Division of HVACMechanics working under a master's supervisionTwo years of HVAC work under a master or verifiable equivalent; 70 percent exam score; six hours of continuing education a year
Apprentice HVAC certificateKentucky HBC, Division of HVACAnyone learning the trade who assists licenseesFree registration on Form HVAC 3; direct supervision by an on-site journeyman and general supervision by a master
HVAC installation permitHBC or an authorized local programInstaller of an initial system in a building designed for human occupancyFiled before work starts; one- and two-family fee is $105 for the first system plus $50 for each additional system; includes three inspections
HVAC replacement permit (on request)HBC or an authorized local programOwner or master who wants a major repair inspectedState fee of $75 for one- and two-family dwellings; required for replacements in Louisville Metro
Metro HVAC contractor's licenseLouisville Metro GovernmentHVAC businesses working in Louisville and Jefferson CountyHeld in addition to a Kentucky master HVAC license in good standing

How do I check an HVAC contractor in Kentucky before I sign?

7 checks, in order, using the Kentucky registers and rules described on this page:

  1. Search HBC's License Search and Verification page for the company's master HVAC contractor license and confirm it is active rather than expired, terminated or inactive.
  2. Match that number to the one KRS 198B.670 requires on the contractor's advertising and vehicles.
  3. Ask for a certificate showing the $500,000 general liability and $300,000 property damage coverage KRS 198B.668 requires.
  4. Confirm who will be on site: a licensed journeyman must be present to supervise any apprentice, and in Louisville Metro a Kentucky master or journeyman must be on site for the whole installation.
  5. Ask whether the job is permitted by HBC or by an authorized local program, and confirm the permit names the master license number and is applied for before work begins under KRS 198B.6671.
  6. On new homes and additions, ask for the heat loss and heat gain sizing calculations, which 815 KAR 8:080 requires at or before the first residential inspection.
  7. Collect lien waivers from the contractor and its suppliers at each payment, and watch for any 75-day notice from a subcontractor or supplier under KRS 376.010.

When is an HVAC permit required in Kentucky, and who inspects the work?

Kentucky's statewide rule is built around the initial system. KRS 198B.6671 requires anyone installing an initial heating, ventilation or air conditioning system to apply for a permit before starting. Under 815 KAR 8:070, that covers new construction, additions with an additional system, and existing buildings getting their first system. No permit is required for window air conditioners, space heaters, or systems outside buildings designed for human occupancy.

Replacements are treated differently at state level. HBC issues a permit and inspects a furnace, condensing unit, heat pump, fan coil, chiller or heating boiler replacement when a master or homeowner requests one, for $75 on a one- or two-family dwelling. Local programs that already permitted major repairs before January 1, 2007 may keep doing so, so change-out rules can differ between counties.

Only a licensed master HVAC contractor can be issued a permit, with one exception. A homeowner installing a system in their own legal residence can get a homeowner permit by filing an affidavit, proof of correct sizing and a complete duct and piping design. The owner must do all the work personally, and only one homeowner permit is issued to a person in any five-year period.

Permits come from HBC or from a local government HBC has authorized under KRS 198B.6673 and 815 KAR 8:100. Local programs work under three-year contracts, must use HBC's fee schedule, and need inspectors with at least six years as a licensed journeyman or master, or certified building inspectors who passed the HVAC exams. HBC keeps institutional and educational buildings and facilities licensed by the Cabinet for Health and Family Services, such as day care centers, hospitals and nursing homes. No local government may add its own HVAC program unless it existed before January 1, 2007.

Under 815 KAR 8:080, inspections cover heating, cooling, exhaust and ventilation systems and dryer venting, but not gas piping upstream of equipment shut-offs. Underground work must be approved before it is covered, a rough-in inspection is required where any part will be concealed, and the final comes before occupancy. A permit includes three inspections and extra ones cost $50. KRS 198B.6672 requires inspections to be scheduled with the owner at least one business day ahead and completed within three business days. A permit expires after six months if work has not begun.

How does HVAC permitting work in Louisville and Jefferson County?

Four of the five HVAC contractors Exchange lists in Kentucky are in Louisville, where Louisville Metro Construction Review runs the HVAC permit and inspection program for Louisville and Jefferson County. Its rules go further than the state minimum: a permit is required to erect, install, enlarge, repair, remove, convert or replace a regulated mechanical system, and Metro Ordinance 150.052 requires inspection and approval before a system is concealed or operated.

Any HVAC business working in Louisville or Jefferson County needs both a Kentucky master HVAC license in good standing and a Metro HVAC contractor's license, and Metro advises homeowners to check both before reviewing estimates. The contractor must get the permit before starting a new installation or replacement, and a Kentucky-licensed master or journeyman must be on site for the whole job.

An HVAC Replacement permit covers standalone change-outs with no new ductwork, structural change or building permit. It is bought through the Metro online portal and issued instantly. Additions, alterations and new construction use the HVAC-Construction permit, and duplexes and larger buildings are permitted as commercial projects.

After the work, the contractor requests the inspection and the inspector calls the owner to schedule it. Replacement inspections run between 8 a.m. and 3 p.m. on the scheduled day. Results are marked pass, final or correction; a final closes the permit and produces an acceptance letter, and a correction can bring a re-inspection fee.

Louisville Metro also notes that cooling systems in the Kentucky region have had to meet SEER 15 since January 1, 2023, so permits issued after that date must use compliant equipment. Owners doing their own residential HVAC work in Louisville must apply in person with photo ID.

Which building and mechanical codes apply to HVAC work in Kentucky right now?

Kentucky has one mandatory statewide building code. Under 815 KAR 7:120, the 2015 International Building Code with the 2018 Kentucky Building Code amendments applies to all buildings except one- and two-family dwellings, townhouses and manufactured homes. Those homes fall under 815 KAR 7:125, which adopts the 2015 International Residential Code with the 2018 Kentucky Residential Code amendments. The current editions, the KBC Fourth Edition and KRC Third Edition, took effect December 3, 2024.

HBC's list of codes currently adopted by Kentucky includes the 2015 International Mechanical Code, the 2012 NFPA 54 National Fuel Gas Code, and the 2009 IECC for residential and 2012 IECC for commercial energy requirements. KRS 198B.6672 bars anyone from using an HVAC system an inspector finds was not installed under those codes.

Under KRS 198B.060 and 815 KAR 7:125, building permits and inspections are not mandatory for single-family dwellings unless a local ordinance requires them. That exemption does not cover the separate HVAC permit for an initial system, so a new house in a county without residential building inspections still needs an HVAC permit and inspection.

HBC has said that several 2023 National Electrical Code provisions delayed under the Kentucky Residential Code, including NEC 230.67 surge protection for dwelling services, became enforceable on July 15, 2026, while GFCI rules 210.8(A) and parts of 210.8(D) remain delayed. HBC has also posted a contractor's August 31, 2026 request for an alternative compliance method for the NEC 210.8(F) GFCI rule on outdoor HVAC equipment.

How do federal refrigerant rules and the A2L transition apply in Kentucky?

Refrigerant handling is regulated federally. Under Section 608 of the Clean Air Act and 40 CFR Part 82, Subpart F, technicians who service or dispose of equipment that could release ozone-depleting refrigerants must be certified, and venting those refrigerants or their HFC substitutes is prohibited. A Kentucky HVAC license and EPA Section 608 certification are separate credentials.

Under EPA's Technology Transitions Program, new residential and light commercial air conditioning and heat pump systems, including split and mini-split systems, are limited to refrigerants with a global warming potential of 700 or less from January 1, 2025. EPA's tables say there is no installation deadline for systems whose components were all manufactured or imported before that date.

Kentucky's codes predate the newer A2L, or mildly flammable, refrigerants, so HBC addressed the gap by letter. On April 22, 2025, its Divisions of HVAC and Building Code Enforcement confirmed that no Kentucky code or law prevents using a refrigerant approved through the alternative materials and methods sections of the KBC, the 2015 IMC and the KRC. The letter accepts equipment listed to UL 60335-2-40 and 60335-2-89 and names 2022 ASHRAE 15 or the 2024 IMC as acceptable installation standards. Ask each bidder which refrigerant and which standard they will use.

HBC has also stepped up carbon monoxide checks. All HBC inspectors now carry CO detectors, and every HBC inspection includes a mechanical room check and a CO reading. By May 14, 2026, the initiative had inspected 125 buildings in 21 school districts. HBC recommends annual inspection of HVAC systems, chimneys and vents by qualified technicians.

What mechanic's lien rules affect HVAC work in Kentucky?

Under KRS 376.010, anyone who performs labor or furnishes materials to improve a structure, by contract with or written consent of the owner, contractor or subcontractor, has a lien on the improvement and land. That covers HVAC contractors, subcontractors and equipment suppliers. Total liens cannot exceed the original contract price.

Under KRS 376.080, the lien is dissolved unless the claimant files a sworn statement with the county clerk within six months after last working or furnishing materials, and mails a copy to the owner within seven days of filing. KRS 376.090 requires an action to enforce the lien within 12 months of filing.

A subcontractor or supplier with no direct contract with the owner must give written notice within 75 days after its last labor or material on claims under $1,000, or 120 days on larger claims. On an owner-occupied single or double family dwelling, the deadline is 75 days regardless of amount, and the lien does not apply to the extent the owner already paid the contractor before receiving the notice.

Homeowners should collect lien waivers from the contractor and its distributor at each payment, and contractors should count the six-month window from their last day on site.

What do Exchange listings show about HVAC contractors in Kentucky?

Exchange lists 5 HVAC contractors in Kentucky as of , spread across 2 cities. The largest cluster is Louisville with 4 of the 5 listings. 5 of the 5 listings link to a company website. Across every trade, Exchange holds 24 live listings in Kentucky, and HVAC contractors is the number 2 trade by listing count there.

HVAC contractors on Exchange in Kentucky, by city
CityListings
Louisville4
Avawam1

Source: Exchange directory data, counted from live published listings on . Counts change as firms join or update their listings; the live list below this guide is always current.

What has changed recently, or is about to change, for HVAC contractors in Kentucky?

Last reviewed against the primary sources listed below. Dates are effective dates unless marked otherwise.

  • — In force: Delayed 2023 NEC provisions under the 2018 Kentucky Residential Code became enforceable, including NEC 230.67 surge protection for dwelling services; GFCI rules 210.8(A) and parts of 210.8(D) remain delayed.
  • — In force: HBC reported that its carbon monoxide initiative had inspected 125 buildings in 21 school districts. All HBC inspections now include a mechanical room check and a CO reading.
  • — Proposed: HBC set up a 2026 National Electrical Code task force to review the 2026 NEC and recommend whether Kentucky should adopt it.
  • — In force: HBC confirmed that A2L refrigerant equipment may be installed under the codes' alternative methods sections, using 2022 ASHRAE 15 or the 2024 IMC as the installation standard.
  • — In force: The current editions of the 2018 Kentucky Building Code (Fourth Edition) and 2018 Kentucky Residential Code (Third Edition) took effect.

Where can I verify a license and check the source in Kentucky?

Every figure and rule on this page can be checked against the primary source. These are the offices that publish them. Confirm current requirements directly before you rely on any of them:

Kentucky Department of Housing, Buildings and Construction — License Search and Verification; Kentucky General Assembly — KRS Chapter 198B (HVAC licensing, KRS 198B.650 to 198B.689); Kentucky General Assembly — 815 KAR 8:070 HVAC installation permits; Kentucky General Assembly — KRS Chapter 376 Statutory Liens; Louisville Metro Government — HVAC Permit; U.S. EPA — Technology Transitions HFC Restrictions by Sector.

HVAC contractors in other regions: Arizona, British Columbia, California, Florida, Georgia, Illinois, Indiana, Maryland, Nevada, New York, North Carolina, Ontario, Pennsylvania, South Carolina, Texas, Virginia, Washington.

Other trades in Kentucky: Roofing & Waterproofing.

Jump to licence verification sources for HVAC in Kentucky, or back to all hvac contractors on Exchange.

Frequently asked questions

Do I need a licensed HVAC contractor to replace my furnace in Kentucky?

Generally yes, if you are paying someone. Kentucky requires anyone practicing HVAC contracting for others to be licensed by HBC, and a furnace replacement counts as a major repair, not routine maintenance. An owner may work on a home they own and occupy without a license. In Louisville Metro, the replacement also needs a Metro permit pulled by a contractor holding both a Kentucky master HVAC license and a Metro HVAC contractor's license.

Can a Kentucky homeowner install their own HVAC system?

Yes, in the homeowner's own legal residence or a home they are building for their own use. The owner must apply for a homeowner permit before starting, file an affidavit, proof of correct system sizing and a full duct and piping design, and do all the work personally. The work must meet the Kentucky Residential Code, and HBC issues only one homeowner HVAC permit to a person in any five-year period.

How much does a state HVAC permit cost in Kentucky?

Under 815 KAR 8:070, a permit for a one- or two-family dwelling costs $105 for the first system plus $50 for each additional system, and that includes three inspections. A requested permit for replacing equipment such as a furnace or heat pump in a house costs $75. Commercial permits are priced by installed value, starting at $125. Authorized local programs must use the same fee schedule.

How often do Kentucky HVAC licenses renew?

Every year. Master and journeyman licenses renew by the last day of the licensee's birth month. Masters pay $250 and journeymen $50, and both must complete six hours of approved continuing education. Masters must also show proof of insurance. There is a 60-day grace period with a restoration fee. After that the license terminates and the holder cannot work until it is reinstated.

Does a new house in rural Kentucky need an HVAC inspection?

Yes, in most cases. Kentucky does not require building permits for single-family homes unless the local government adopts an ordinance requiring them. But the HVAC statute separately requires a permit before installing the initial heating or cooling system in any building designed for human occupancy. Where no authorized local program exists, HBC issues the permit and its inspectors carry out the inspections.

Are A2L refrigerant systems allowed under Kentucky's older codes?

Yes. Kentucky still enforces codes based on the 2015 international codes, but HBC has said no state or local law prevents using refrigerants approved through the codes' alternative materials and methods provisions. Its April 22, 2025 letter accepts equipment listed to UL 60335-2-40 and 60335-2-89, installed under 2022 ASHRAE 15 or the 2024 International Mechanical Code.

Can an unpaid HVAC supplier put a lien on my Kentucky home?

Possibly. On an owner-occupied single or double family home, a supplier or subcontractor with no direct contract with you must give you written notice within 75 days after its last delivery or work. The lien does not cover amounts you already paid your contractor before that notice arrived. Any lien statement must be filed within six months, and a copy mailed to you within seven days.
Absolute Services — HVAC

Absolute Services

Birkhead Co. — HVAC

Birkhead Co.

KLM Heating & Cooling — HVAC

KLM Heating & Cooling

Appalachian Refrigeration Heating & Cooling — HVAC

Appalachian Refrigeration Heating & Cooling

Elder Heating and Air

Loading…