IMPACT Pump Solutions Inc. is a leader in providing high-quality pumping solutions and consumables designed to meet diverse industrial needs. Our flagship products include the Silverback Blender Discharge Pump, known for its efficiency and reliability in handling complex blending and discharge tasks. This pump is engineered to deliver consistent performance, ensuring smooth operations in demanding environments. We also offer the Silverback GR Series Suction Pump, which excels in managing challenging suction applications. Built for durability and precision, this pump is ideal for operations requiring robust and dependable suction capabilities. In addition to our advanced pump systems, we provide Impact Premium Pump Consumables. These consumables are specifically designed to enhance the performance and extend the lifespan of our pumps, ensuring they operate at peak efficiency and reliability. Our commitment to quality and innovation ensures that all our products meet and exceed industry standards. By focusing on both performance and durability, IMPACT Pump Solutions Inc. delivers solutions that support the success of our clients’ operations. Our dedication to providing reliable and effective pumping solutions is reflected in the high standards we uphold and the satisfaction of those we serve. For more details about our products, visit us at https://ipumps.com/product/silverback-blender-discharge-pump/ & https://ipumps.com/product/silverback-gr-series-suction-pump/.
Case pressure on the MABRE engineered vertical inline range is capped at a 740 psi maximum case design, with suction and discharge nozzles supplied as Class 150 or Class 300 raised-face flanges to ASME B16.5. Impellers are balanced to G1.0, the tightest grade in ISO 21940, and the bearing set in the flexibly coupled WPV-B OH3 variant, duplex 40-degree angular-contact thrust bearings paired with a cylindrical roller radial bearing, is rated for an L10 life of 25,000 hours at the rated duty point. That bearing housing carries impeller loads itself, which is what lets the pump run on a standard motor instead of a special one.
The range splits three ways. The WPV-R OH4 is rigidly coupled for LP-base motors, carries pump thrust through the coupling into the motor, and is built so the impeller bearing and mechanical seal can be replaced without pulling the motor off. The WPV-HQ OH4 adds a shaft tube with an integral convection cooling system for hot duty, rated to 177 C on hot water and 288 C on thermal oil, and it also allows seal removal with the motor in place. Cases are carbon steel or duplex stainless with other metallurgies available on request, fitted with fully enclosed impellers, a one-eighth-inch corrosion allowance and a stated minimum 20-year service life with three years of uninterrupted running.
MABRE is aimed at oil and gas and general industrial process service where full API 610 compliance is not required but API discipline still applies. The case and cover sealing arrangement follows API 610 practice, the pumps are designed to the vibration limits in API Table 8, and full API materials can be specified when a job calls for them. Lubrication is offered as grease or oil mist, and a product brochure is downloadable from the page.
On the pressure pumping side, the Silverback GR Series suction pumps are configured as 8x6x16, 10x8x16 and 12x12x15, and the blender discharge pump is built as a 14x12x22 drop-in replacement, so it goes into an existing arrangement without re-plumbing. A 5×6 pressurizer pump completes that group, and the consumables line covers plungers and packing. IMPACT holds ISO 9001:2015 registration for its quality system, publishes a supplier code of conduct, and works from two addresses: 4451 54 Ave SE in Calgary and 5623 W. 860 S. in Hurricane, Utah. Quote requests go through a form on the contact page, with a response promised within one business day.