For over 70 years, A&A Coatings has provided thermal spray coatings and applications to a long list of satisfied customers. We have always been at the forefront of the thermal spray coating, and thermal spray application industry. We specialize in thermal spraying and application on metal, ceramic, cermet, and hardfaced coatings. We serve a wide range of industries including the military and defense, electronics, aerospace, and marine industries. We have earned our reputation of high quality results, fast turnaround time & dependable service.
In addition to providing thermal spray coating services and thermal coating application service, we also do restoration and machining. We can extend the life of critical parts or salvage mismachined parts thanks to our in house grinding, lapping, undercutting, and finishing service capabilities.
Over the years, we have also developed many proprietary coatings to solve industry specific problems. for example, we developed A706 for the printing industry, MicroCoat semi-conductor, Cerami-Pak for packaging, Wirewear for the wire drawing industry. Our proven record of innovation and cost-effective solutions are sure to meet your business or agency’s specific needs.
Four process families, one plant.
Everything A&A sprays moves through a single facility at 2700 South Clinton Avenue in South Plainfield, New Jersey, a plant the company has run since 1944 and devoted strictly to applying metal, ceramic, cermet and hardfaced coatings.
The shop runs four distinct process families, and which one a part gets depends on what the coating has to survive. HVOF burns fuel gas with oxygen in a chamber and pushes the flame out at supersonic speed, carrying powder into the surface hard enough to leave a dense, low-porosity layer. Plasma spray uses an electric arc to superheat gas past 15,000 degrees Fahrenheit, which is what makes ceramics and high-temperature alloys sprayable at all. Metalizing covers the flame and arc wire methods. Spray and fuse hardfacing is the outlier: the alloy goes down first, then gets fused with a torch or furnace, producing a metallurgical bond rather than the mechanical bond the other three rely on.
Defense work carries its own paperwork, and A&A keeps it current. The plant is certified to apply coatings under MIL-STD-1687A, the Navy standard for thermal spray, and publishes its NAVSEA S9320-AM-PRO-030 and MIL-STD-1687 approval letters for download. The quality system is written to MIL-I-45208 and has been audited both by government agencies and by prime contractors. The company also holds a Department of Defense achievement award.
The industry list runs to roughly thirty entries and reaches well past the sectors the company is usually associated with. Oil and gas, pulp and paper, mining, wind energy, solar energy, bottling and canning, mold and die, pump repair, textile manufacturing, valves, converting and agriculture all appear on it.
Finish machining is organized into named service lines rather than treated as cleanup: roll grinding, undercut pre-machining, and general finishing. An in-house laboratory tests bond strength and coating thickness on work leaving the plant, and a separate research and development service exists for customers whose coating problem does not yet have an answer.