Kennedy Jenks is an employee-owned water and environmental engineering firm that traces its start to 1919, when Clyde C. Kennedy opened an office in San Francisco. Harry Jenks ran a separate practice in Palo Alto, and the two families’ firms merged in 1980. It’s been employee-owned since 1972 and has offices across the West and in Texas, Florida, Virginia, New Jersey and elsewhere. Its work centers on drinking water, wastewater, recycled water and PFAS, with program and construction management alongside design. In Arizona it holds a roughly $15 million program and construction management contract on Gilbert’s $536 million North Water Treatment Plant reconstruction, which the Sundt/PCL joint venture has brought to about 75% complete. That’s a big municipal rebuild, and it’s reportedly on budget so far.
The project list is where this firm’s range shows. Kennedy Jenks features Pure Water Monterey, the groundwater replenishment scheme for the Monterey Peninsula Water Management District and Monterey One Water; the Silicon Valley Clean Water regional environmental sewer conveyance upgrade; the Tualatin interceptor for Clean Water Services in Oregon; the City of The Dalles wastewater treatment plant; and site preparation for Sacramento’s EchoWater project. Potable reuse, conveyance and treatment plant work in roughly equal measure.
Service lines are published as distinct practices rather than a single engineering offer: wastewater treatment, stormwater, transmission and conveyance, solid waste management, utility management, risk assessment, design engineering and research. Industrial clients sit alongside municipal utilities, which is less common than it sounds for a water firm.
Regulatory change is treated as a service area in itself. The firm publishes guidance on the EPA’s PFAS rules and on the Lead and Copper Rule Improvements, keeps an emerging contaminants lead, and has written on direct potable reuse regulation in Texas, where approvals are handled case by case. For a utility deciding whether to treat, blend or switch sources, that reading of the rules is usually the first deliverable.
The firm has also brought control system programming in-house, which means SCADA and process control work that would normally go to a systems integrator can stay inside the design team.
Staff recognition points the same direction: one team member received a Microplastics Team Member of the Year award and recognition from the Interstate Technology and Regulatory Council.
Work is delivered across the United States, and the firm is employee-owned, with employee ownership published as part of how it describes itself rather than a footnote.