Vision Spray Systems is a spray foam insulation and coatings contractor. We specialize in polyurethane, insulation, protective coatings, concrete lifting, thermal protection and fireproofing. We work with architects, designers, and homeowners to find solutions to all types of building envelopes. All of our spray foam applicators are licensed and certified through UFC (Urethane Foam Consultants). We have over 15 years of spray foam experience, and over 30 years in the construction industry in total. Choosing spray foam will provide the best ROI, energy efficient savings, and eco-friendly insulation for your home or business.
Geography is tight and deliberate here. Vision Spray Systems works Vancouver and the surrounding Lower Mainland, naming East Vancouver, North Vancouver, West Vancouver and South Vancouver specifically, and operates from an address on Victoria Drive in East Vancouver. Chad and Crystal run the company, and the site is candid about why that catchment suits the trade: Vancouver averages roughly 4C in winter and 18C in summer with over 1,100mm of rain a year, a mild but persistently wet climate that makes moisture intrusion, not just heat loss, the thing an envelope has to be designed against.
That is where the closed-cell and open-cell distinction earns its keep, and the company explains it rather than leaving the choice to the customer. Closed-cell foam is denser and rigid, carries a higher R-value per inch (the site cites R5.7), resists moisture well enough to act as a vapour barrier, and adds structural stiffness to walls and roofs, which is why it is put forward for exterior applications, basements and moisture-prone areas. Open-cell is lighter, softer, more expansive and cheaper, with a lower R-value but better sound absorption, so it is directed at interior walls and ceilings. Blow-in insulation sits alongside the sprayed products, and the spray-applied thermal insulation line is aimed at multi-residential, commercial and industrial work where heat transfer, acoustic control, moisture protection and parkade durability all matter at once.
The client list is broader than houses. Vision works with architects and designers on interior envelope problems and has insulated buildings for homeowners, businesses, commercial building owners, industrial plants and municipalities, targeting thermal bridging, frost transfer and sound pollution. Typical project types named on the site are apartment and condominium communities, universities and schools, and corporate offices and parking structures. New construction and repair or restoration work are both handled, occupied and fully operational job sites are not treated as an obstacle, and multi-phase jobs are planned, managed and built in house. The process is described in three stages, with budget and schedule monitoring before construction, subcontractor accountability during it, and site cleanup, final inspections and a closing walkthrough afterwards.
Practical details: quotes are free, the office runs Monday to Friday, 9:00 AM to 4:00 PM, and weekends are closed. One thing worth planning around is curing. Spray foam is safe once cured, but the company requires ventilation and that the home be vacated for 24 hours until the foam has fully reacted. The business also markets its foam on energy-efficient, eco-friendly grounds, and has sponsored local youth softball, backing the Abbotsford Outlaws previously and the Maple Ridge Pride Rep B team this year.